"Let us startle, astound, amuse and inform our fellow human travellers."
This board solves the problem of driving very high powered LEDs and LED arrays, with constant current up to 1.5 Amp for each output. A maximum of 24V DC input allows for a wide range of LEDs and LED arrays to be driven by each of the eight outputs. That is a lot of Wattage driving very bright LEDs!
*Please Note that these specifications and prices are subject to variation, please confirm before ordering.
DM-LED8
Switching board, 8 individual channels, each with digital level input, up to 1.5 Amp constant current output, set via a small resistor, preset to 750mA
To order, enquire or discuss, contact
Description
- 102 x 63 x 13 mm with mounting holes (D4mm) 93 x 53 mm
- 24DC 6.5A supply requ. If all channels supplying 750mA (default)
- PWM (Pulse Width Modulated) level control, plus On & Off Logic control of each output
- 8 channels of High Power LED array switching
Applications so far
- DMX (RS485) control dimming of 8 channels of 750ma current limited LED arrays for architectural lighting
- DMX (RS485) control dimming 8 super bright LED array channels at 1A for underwater vehicle prototype
Expandable
- These units can be fitted with custom components that could drive higher or lower current limited LED loads
- Contact us to discuss any application, different i/p voltages, animatronics, lights control, etc
Price
- DM/LED8 standard configuration, Aus $395 ea, $305 ea for 25 +, plus taxes and pack & post
To order, enquire or discuss, contact
| | home | | about Electrickery | | products overview | | DMX - RS485 - RS232 - 8 I/O general purpose microcontroller engine | |
| | Data Projector Timer | | High Power LED panel | | High Power LED control | | 8 channel High Power LED dim & switch | |